Skip to content

How to Calculate Weighted Grade

A weighted grade counts some parts of a course more than others. To calculate it, multiply each category's score by its weight, add those results together…

4 min read

A weighted grade counts some parts of a course more than others. To calculate it, multiply each category's score by its weight, add those results together, and divide by the total weight:

Weighted grade = Σ(score × weight) ÷ Σ(weights)

When the weights add up to 100%, the last step is dividing by 1, so you can simply add the weighted scores. The rest of this guide works through a full syllabus, then the case most students actually face: calculating a grade halfway through the semester.

A worked example from a syllabus

Suppose your syllabus lists these weights, and these are your averages in each category:

CategoryWeightYour scoreScore × weight
Exams40%8484 × 0.40 = 33.60
Project25%9292 × 0.25 = 23.00
Homework20%9595 × 0.20 = 19.00
Quizzes15%7878 × 0.15 = 11.70
Total100%87.30

Your course grade is 87.3%. On a common scale that is a B+.

Notice that a simple average of the four scores would be (84 + 92 + 95 + 78) ÷ 4 = 87.25%. The two results happen to be close here, but they are not the same calculation. With different weights they can be far apart. If exams were worth 70% and you scored 60 on them, strong homework would barely move your grade.

Calculating a grade mid-semester

Before every category has a score, the weights you have so far will not add up to 100. Say only exams (40%) and homework (20%) are graded:

  1. Weighted points so far: 84 × 0.40 + 95 × 0.20 = 33.6 + 19.0 = 52.6
  2. Weight graded so far: 40% + 20% = 60%, or 0.60
  3. Current grade: 52.6 ÷ 0.60 = 87.67%

Dividing by the weight that has been graded is what turns 52.6 points "out of 60" into a percentage. Skipping that step makes it look as if you are failing (52.6%), when you are actually on track for a B+.

Keep in mind that a mid-semester grade only describes the work already graded. The remaining 40% can still move it a lot. To see what you need on what is left, the Final Grade Calculator works backward from a target grade.

Where category scores come from

Each category score is usually an average of the items in it. How it is averaged depends on your instructor:

  • Points-based: add the points earned and divide by the points possible. A 20-point quiz counts twice as much as a 10-point quiz.
  • Equal-weight: average the percentages, so every quiz counts the same no matter its point value.
  • Dropped scores: some courses drop the lowest quiz or homework before averaging.

If your syllabus does not say which method applies, it is worth asking. The difference can be several points.

Common mistakes

  • Using weights as whole numbers without dividing. 84 × 40 = 3,360 is a weighted total that must later be divided by 100 (or by the total weight). Converting 40% to 0.40 first avoids the extra step.
  • Averaging category scores equally. That ignores the weights entirely.
  • Forgetting extra credit rules. Extra credit may be added to a category or to the final grade, which gives different results.
  • Treating weights that do not total 100% as an error. Mid-semester, they rarely will, so divide by the total weight you have.

Using the Weighted Grade Calculator

Enter each category's name, score and weight in the Weighted Grade Calculator. It multiplies, adds and divides by the total weight for you, shows each category's contribution, and gives a letter grade. For the full syllabus above it returns 87.30% (B+).

If your weights add up to less than 100%, as in the mid-semester example, the calculator says so and normalizes the result across the categories you entered. It returns 87.67% for exams and homework alone. For a single assignment or test score rather than a weighted course average, use the Grade Calculator.

Try the calculators from this article